Giving you complete control over temperature and humidity in your grow room is the Faran Humidifiers with analogue Humidistat controller. The Humidistat controller allows you to set your desired humidity level with ease. Faran HR Humidifier units are very reliable and low cost effective to run, using modern centrifugal humidification as opposed to the more unreliable ultrasonic methods of humidification consuming only 90 watts of power.
HR-50 Humidifier - Suitable for rooms up to 150m square.
- Coverage : 100-150 sq.meters (1,176-1,614 sq ft)
- Power supply : 110V/50Hz or 220V/60Hz
- Power consumption : 90W
- Humidification capacity : 2,500~4,000cc/hour (1.05 gallon/hour)
- Feed water pressure : less than 5kg/sq.cm.
- Dimensions : 370 X 370 X 480 mm (14.56″ X 14.56″ X 18.90″)
Analogue Humidistat HR-EHSA
- Measurement range: 10% ~ 80%(rh)
- Accuracy: ±5%
- Operation span : 3%
- Operation method : ON/OFF
- Capacity of micro switch : 2.2A
- Temperature : 10~40°C
- Sensor type : Nylon loop
- Dimension : 140H x 95L x 45W (mm)
- Power supply : 110V (220V) / 60Hz(50Hz)
- Power cord : 2m
Digital Humidistat HR-DHTC
This easy to use device has two outputs. The first output will control either a HR-15 or HR-50 humidifier, or a dehumidifier. The second output will control a heater or air-conditioning unit.
Specifications:
- Power supply: AC220 50/60HZ
- Temp. Measurement: -50 ~99.9 Degrees C
- Humid. Measurement: 0-100%
- Output Control: Relay 220VAC
- Control Method: On/Off Control
- Input Temp. Sensor: NTC 5K Ohm. 25 Degree C